IProduct Overview
The CDXLT geocell production line combines sheet extrusion with ultrasonic welding to produce geocell panels in a continuous, automated process.
Complete geocell production lines: sheet extrusion + ultrasonic welding. 16 heads, 8m weld width, Ø210 extruder, 200-300 kg/h.
The CDXLT geocell production line combines sheet extrusion with ultrasonic welding to produce geocell panels in a continuous, automated process.
| Parameter | Value |
|---|---|
| Weld heads | 16 heads |
| Weld width | 8 m |
| Extruder | Ø210 mm |
| Throughput | 200-300 kg/h |
| Process | Sheet extrusion+welding |
| Panel height | 50-200 mm |
Extrusion and welding in one line reduces labor by up to 60%.
Servo-driven heads with closed-loop pressure control.
Tool-less height adjustment, panel changes under 15 min.
Precise extrusion control achieves >95% material utilization.
Common technical and commercial questions from buyers
A geocell production line combines plastic sheet extrusion with ultrasonic welding to produce honeycomb geocell panels used for soil stabilization, slope protection and load support.
Extruded geocell comes from one continuous sheet with die-cut strips, while welded geocell is made from separate strips ultrasonically welded into a honeycomb structure. Welded lines offer a wider cell size range at lower tooling cost.
Our standard geocell welding line uses 16 ultrasonic welding heads with 8 m weld width. Head count and working width can be customised.
Typical output is 1,500-3,000 m2 per 8-hour shift, depending on cell size and sheet thickness.
HDPE and PP sheet from 0.8 mm to 2.0 mm thickness, with smooth or textured surface.
Price depends on weld width, head count and whether sheet extrusion is included. Send your cell size and daily output requirement and CDXLT will quote within 24 hours.